A little moisture on a finished ground floor may not make you anxious, but avoid ignoring it. This matter should be a topic of concern as a slight leak may get more prominent later on and, if not appropriately addressed, will pose health risks and cause tremendous damage to the foundation.
Fungi grow in the presence of high moisture and can eventually cause hazards to the health of your loved ones. You may sometimes feel the dampness in the air after the storm. Then it would help if you looked for cracks in your house, particularly in the basement. A mild odor radiated by the stairs of your basement could indicate mold growth in the vicinity. A hairline fissure can occur on concrete fences or the basement ground. Some of the shots only disturb the aesthetic of your house and may not call for anxiety. But some cracks that may characterize dampness should get immediately addressed. In this short guide, some of the techniques for unraveling your waterproofing problems get listed.
This step is the most labor-intensive. Massive equipment helps in removing the soil and the debris. Several feet of area is cleared in this step so that the technicians can work. The length of this area can be a single wall or the whole circumference of the home.
- Wall cleaning and examination
After the excavation, the space is power washed to remove soil and other debris. The technicians will now be able to get to the core of the moisture infiltration issues. The expert must inspect the basis of the ruptures or any other openings.
- Repairing the foundation cracks
The expert now needs to fill the cracks with highly durable hydraulic cement. Once the cracks get repaired, the foundation walls again become structurally rugged. The cement for repairing the cracks hardens within a few hours, and you can shovel it to a smooth finish.
- Installing of liquid membrane
A fluid membrane gets spread with the help of the trowel, which offers waterproof defense to the base fence, footings, and various structural materials. The asphalt made of rubber is also applied to bridge the gap of fissures and other openings to safeguard the area from dampness infiltration.
- Application of glass material
Glass fabric gets applied in this step to offer additional protection against rottenness, mold, and moisture wicking.
- Aqua bloc membrane
The application of aqua bloc coating provides an additional shield to the foundation wall.
- Installing drain tile
The technique is a better alternative for draining the water removing extreme pressure from the foundation walls, and installing a drain tile. This system gets installed through multiple coatings. These layers comprise washed gravel and perforated PVC tube. These coatings help in preventing soil from jamming the system.
- The final coatings
The concluding step involves shrouding the drain tile with gravel of particular niches. The whole excavation area gets backfilled with soil. If you need professional advice for basement waterproofing in Louisville KY click here to get help.
The steps mentioned above will provide you with valuable and safe space for you and your loved ones in the future.