Every plumbing system has three key parts, which are the fixtures, pipes and fittings, and drainage. Identifying how the plumbing method operates in the household aids you in looking for the most ideal and safest plumbing pipe, helping you reduce plumbing emergencies that may happen in the future.
What’s interesting is that you can enjoy years of stress-free plumbing systems with the use of proper installation and regular maintenance. Hence, getting better insight into your plumbing system is essential. Fortunately, here is an article that can help you understand how the system functions to diagnose issues better whenever they occur.
3 Basic Components
- Pipes and Fittings
Definitely, your plumbing system runs throughout the house. For sure, you have it in your bathroom, kitchen, basement, and even garage. The pipes and fittings involve each pipe and valve that runs from the main water supply lines all over your home.
This should include the most secure plumbing pipe for the home’s water supply. Most methods have hot water and cold water pipes. Hence, each pipe can vary because the pipes you need should withstand a particular temperature for your requirement. The pipes and fittings can be made from the following:
For reliable and durable pipes and fitting needs for your plumbing system, check out the website https://www.tubomart.com/. Tubomart has been in the business for over 20 years, and they are known for creating premium valves and pipes. See their website to know more.
- Plumbing Fixtures
The plumbing fixtures are connected to the pipes, giving you full access to the water supply. The plumbing fixtures include:
- washing machines
- hot water heater
- dish washers
Each bathroom or kitchen fixture have to be correctly installed and regularly checked to save on water usage and reduce water leaks. Make sure to research ways to maintain the bathroom fixtures in order to extend their lifespan and lessen unwanted plumbing emergencies.
- Drainage System
Last fundamental part, but not least, is the drainage system, which is the main part of your plumbing system because it may cause an expensive emergency. Note that the drains connect the plumbing fixtures to the sewage system’s waste removal lines. So be sure to avoid clogging your drains because doing so will allow waste to pass through freely without clogging.
Getting to Know More About Plumbing Basics
The plumbing system adheres to nature’s basic laws, which are pressure, gravity, and water seeking its level. Understanding this, you will better grasp the mysteries behind plumbing systems and tons of fixes your home needs, which will save you more trouble.
The plumbing in your house is composed of two distinct subsystems. One subsystem carries fresh water while the other expels wastewater. The water that goes into the home is under pressure. It enters your house under enough pressure and lets it travel up and around corners wherever it is required. As water comes into your house, it goes through a meter that presents the amount of consumption.
- Drainage Systems
The systems in your home are essentially the same, whether it is on a septec or sewer system. Drainage systems do not rely on pressure as what supply systems do. Instead, waste matter leaves your home due to drainage pipes angled downward at the sewer. Then, gravity pulls the waste, and while the sewer line continues the downward flow, it will be transported to a septic tank or sewage treatment facility.
Have you noticed what is under your sink? There, you can find a trap that is in S-shape or curved form section of pipe beneath the drain. The water flows from the basin with enough force and pass through the trap, then out the drainpipe. Still, there will be enough water which stays in the trap to create a seal that prevents the sewer gas into going up into your home.
Since a drainage system has all of the basic part, it is typically pertained as DMV or drain-waste-vent- system. If water is to pass out freely and waste is to go out properly, all elements of the DWV must be present and functioning well. You can check the pipes in your basement to help you know better the piping system.
- Supply and Drainage Subsystems
The supply and drainage subsystems are two distinct systems, and there is no overlapping between them. There are bridges between the two, and the bridges make the plumbing system worth having. In plumbing jargon, the bridge between the drainage system and supply is called a fixture.
Furthermore, outside faucets and washing machines are also fixtures. How so? Because all equipment that draw fresh water and discharge waste water are considered fixtures, structured to maintain the supply and drainage systems strictly segregated.
No one would want a leaking pipe and experience a puddle of water in their house. This is why plumbing system is essential to understand. Suppose you need a professional help with your pipes, then plumbers are your go-to persons. Make sure to get help from skilled plumbers if you are unsure to avoid a leak disaster. Good luck!